The fonds includes 27 drawings (1888-1896) of, notably, a house for George Drummond on Sherbrooke Street in Montreal and the Montreal Diocesan Theological College on University Street are documented in watercolour drawings of plans, elevations, and sections. In addition, there are measured drawings of the Hugh Allan house on Pine Avenue West in Montreal, designed by John William Hopkins (1825-1905) in 1861. These drawings were used for Taylor and Gordon's designs for additions to the Allan house. There is also an undated photograph of a measured drawing of the Hugh Allan house. In addition, there are also drawings by Andrew Taylor for the Montreal Maternity Hospital (Centre Hospitalier Ste-Jeanne-d'Arc), 1903. The fonds contains one published volume: Andrew T. Taylor, "The Crowns and Steeples Designed by Christopher Wren," (London: B.T. Batsford High Holborn, 1881)

Includes 5 plans; 2 elevations; 2 sections; 7 details: elevation/section, elevation section, soffit of cornice, plan, reflected ceiling plan; 1 other: heating and ventilation. Undated drawings include 14 by John S. Archibald and M. Perrault, Associate Architects, 1 by Saxe and Archibald, Architects, and 2 by John S. Archibald with A. Venne, Consulting Architect. Maurice Perrault died in 1909. From 1902 to 1913 or 1914, Archibald frequently practiced with Charles Saxe as Saxe & Archibald.

Consists of one plan.

Consists of one plan.

Includes 22 plans; 3 elevations; 3 sections; 5 details: schedules, memorial hall and exterior details.

14 drawings:2 perspectives, 10 preliminary drawings, 2 working drawings2 marker on trace, 2 pencil on paper, 8 marker and pencil on trace, 2 pencil on vellum28 x 43cm.no project file

4 drawings:2 preliminary design drawings, 1 fence detail by Rosen et Associes Architectes, 1 working drawing1 marker and pencil on trace, 1 pencil on mylar, 1 marker on print, 1 print.109 x 66cm, 84 x 76cm.no project files

File consists of 8 drawings, including 2 equipment location plans for water treatment, 2 exterior perspectives, 3 preliminary drawings, 1 working drawing, and 1 project file (specifications, correspondence).